|
|
Build Your Online Product Catalogs?
| Product Name: |
Addition cured silicon rubber for silicon insole
|
| Supply Ability: |
300tons |
| Related proudcts |
silicon, silicon rubber, medical silicon, |
| Specifications |
Q625# silicon rubber |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
USD9.8~ USD11.9 per Kilogram |
|
Addition cured silicon rubber for silicon insole
Addition cured silicon rubber for silicon insole Applications: silicon insole, Silicone Gel Toe Spreaders, Silicone Gel Arch Supports, Silicone Gel Metatarsal Pad, silicon pads, Silicone Gel Heel Cups
Addition cured silicon rubber for silicon insole Typical Datasheet :
Model: Q625# silicon rubber
Appearance: Tran***rent
Mixing Ratio: 1:1
Operating time (Mins 25℃): 30 -50
Curing time (H 25℃): 3 ¨C 5
Curing time (Mins 60℃): 20 ¨C 30
Hardness (A¡ã): 25¡À2
Density ( g/cm 3 ): 1.08
Viscosity (CS) (After mixed): 8000 ¡À 500
Tensile-strength( kgf /cm2 ): 45 ¡À 5
Tear-strength (kgf /cm2: 14 ¡À 2
Elongation-break(%):450 ¡À 50
Retractility(%):¡Ü0.1
Addition cured silicon rubber for silicon insole Advantages:
1. High tran***rency.
2. High fluidity, high curing rate.
3. Pressure release.
4. Shock absorption.
5. Multiple density
Addition cured silicon rubber for silicon insole Points of attention:
1,Prone to poisoning, can not mix with condensation, ionic compounds containing N, S-, P, organic matter and of Sn, As, Hg, Ph., easy molding plastic poisoning, resulting in the phenomenon of not curing.
2,Co***ring with Condensation cure silicone, Addition cure silicone's adhesive properties to be worse.
3,Addition cure silicone affect by temperature greatly when cured under room temperature.
4,Addition cure silicone is easy to poisoning, please clean the tools which are used for condensation silicone rubber, so that it can avoid poisoning.
It¡¯s fobidden to add the pigment or powder to addition cure silicone rubber arbitrarily,it¡¯s easy to make the catalyst to be poisoning.
5,Addition cure silicone rubebr has two-component, the component A and component B, please pay attention to clean the component A containers before using for the component B, and vice versa
6,In order to avoid the hardness change, we should mix the component A and component B according to its mixing ratio strictly, no atter it¡¯s 1 : 1.
Addition cur |
| Company: |
Shenzhen Hongye Jie Techonology Co.Ltd
|
| Contact: |
Mr. hanks lee |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, |
| Postcode: |
518117 |
| Tel: |
8675589948006 |
| Fax: |
86-755-89948030 |
| E-mail: |
|
|
|
|
Home
